| Customization: | Available |
|---|---|
| After-sales Service: | 2 Years |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 5000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Aerial Working Platform XGA16
The single-cylinder drives the boom and the column to synchronously luff and lift, increase the operating speed, quickly approach the construction area, and improve the construction efficiency. It is suitable for construction areas with relatively low height and relatively narrow space.
The use of lubrication-free bushings and sliders reduces the friction between the joint hinge points and the sliders between the booms, and better adapts to welding and dust construction environments, while greatly reducing the failure rate and improving the service life of the entire vehicle.
The power system adopts an electronic control engine. The sensors of oil pressure, water temperature and speed are integrated with the engine and controlled by ECU, which is safe and reliable. At the same time, it comes with a fault diagnosis interface to facilitate fault diagnosis and maintenance.
Σ-shaped boom, compact and flexible, able to ascend and descend vertically or extend horizontally to cross obstacles; the platform can turn 160°, creating a wider operation area; compact and narrow turntable eliminates tail swing and improves operation efficiency;
Off-road chassis, 4W drive system, solid off-road wide tire, full-time axle balance system, 38kw power, excellent adaptation to any terrain. Work platform is enable to extend out, enlarging the work space, together with the foldable fence making the transportation easier.
Full - range work; direct and friendly control panel easy to control; precise and effective electric-hydraulic proportional system Chassis tilting protection, platform overloading warning, emergent lowering, safety speed limit, flexible start/stop technologies.
|
Overall dimensions (L × W × H)
|
6.69×2.26×2.13 m
|
|
Working platform overall dimensions
|
1.83×0.76×1.15 m
|
|
Max. speed
|
6.12 km/h
|
|
Max. gradeability
|
≥30%(2WD) ≥45%(4WD)
|
|
Min. external turning radius
|
≤4.5m
|
|
Ground clearance/m (centre)
|
0.41 m
|
|
Wheelbase
|
2.1 m
|
|
Total mass
|
6900 kg
|
|
Rated working height
|
16.05m
|
|
Max. platform height
|
14.05m
|
|
Max. working range
|
8.22m
|
|
Max. net spanning height
|
7.14 m
|
|
Scope of luffing of No. 1 arm
|
0°~60°
|
|
Scope of luffing of No. 2 arm
|
-9°~75°
|
|
Scope of crank arm luffing
|
-60°~80°
|
|
Scope of platform swing
|
160°
|
|
Slewing angle
|
355° discontinuous slewing
|
|
Slewing radius of turntable
|
1.145 m
|
|
Max. Load capacity
|
230 kg
|
|
Max. Tail swing
|
0 m
|
|
Control system
|
12V DC proportional control
|
|
Emergency control unit
|
12V DC battery
|
|
Tire
|
33×12-20 off-road solid type (optional: 315/55 D20 off-road foam tire)
|
|
Weighing detection
|
Standard configuration
|
|
Axle balance system
|
Standard configuration
|
|
Platform lifting/lowering speed
|
0.1~0.3m/ s
|
|
Extending/Retracting speed of Boom No.2
|
0.1~0.3m/ s
|
|
Slewing speed
|
0.5~1r/min
|
|
Engine rated power
|
38KW/3000rpm, 36.3KW/2800rpm
|
){kind=link}