| Customization: | Available |
|---|---|
| After-sales Service: | Professional Technicians After-Sales |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm-lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. GR135 adopt famous 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.
2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmission box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.
3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.
4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.
5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.
|
Item
|
GR135
|
||
|
Basic parameters
|
Rated power/speed
|
97(2200r/min)
|
|
|
Overall dimension (standard)
|
8015X2380X3050
|
||
|
Total weight (standard)
|
11000kg
|
||
|
Tire specification
|
13.00-24
|
||
|
Ground clearance (front axle)
|
515mm
|
||
|
Tread
|
2020mm
|
||
|
Space of front and rear axles
|
5780 mm
|
||
|
Performance parameters
|
Forward velocity
|
5,8,13,20,30,42km/h
|
|
|
Reverse speed
|
5,13,30km/h
|
||
|
Tractive effort f=0.75
|
61.3kN
|
||
|
Maximum gradeability
|
20%
|
||
|
Tire inflation pressure
|
300kPa
|
||
|
Working system pressure
|
16MPa
|
||
|
Transmission pressure
|
1.3-1.8Mpa
|
||
|
Working parameters
|
Maximum steering angle of front wheel
|
±49°
|
|
|
Maximum slant angle of front wheel
|
±17°
|
||
|
Maximum oscillating angle of front axle
|
±15°
|
||
|
Maximum oscillating angle of equilibrium box
|
±16°
|
||
|
Maximum steering angle of frame
|
±27°
|
||
|
Minimum turning radius
|
6.6m
|
||
|
Scrape knife
|
Maximum lift height
|
410mm
|
|
|
Maximum cutting depth
|
515mm
|
||
|
Maximum tilt angle
|
90°
|
||
|
Cutting angle
|
54°-90°
|
||
|
Angle of revolution
|
360°
|
||
|
Length & chord height
|
3660x610mm
|
||
){kind=link}