Heli Small Cheap 3ton CPCD30 off-Road Electric Diesel Forklift
Product Features
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High-efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device is used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving, increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure safety.
- Parking brake with a safety protection device, when the parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material from falling down in case of hose broken.
- High-pressure hose is designed far away from the driver.
- Safety wire harness, using a waterproof plug.
3ton HELI Diesel Forklift CPCD30 Made in China |
Model |
Unit |
CPC30/CPCD30 |
Power type |
|
Diesel |
Rated capacity |
kg |
3000 |
Load center |
mm |
500 |
Mast Lifting height |
mm |
3000 |
Free lift height |
mm |
175 |
Fork size(L*W*T) |
mm |
1070×125×45 |
Tilting Angles(Front/Rear) |
deg |
6°/12° |
Front overhang |
mm |
485 |
Exterior Size |
Length without fork |
mm |
2680 |
Overall width |
mm |
1225 |
Mast drop |
mm |
2065 |
Max.lift |
mm |
4250 |
Front-wheel Overhead |
mm |
2070 |
Min Turning Radius |
mm |
2420 |
Min.intersecting aisle |
mm |
2100 |
Speeds |
Max Driving speeds |
km/h |
18.5/20 |
Lifting speeds |
mm/s |
470/520 |
Lowering speeds |
mm/s |
550/520 |
Max.grade ability |
% |
20 |
Total weight |
kg |
4300 |
Tires |
Front |
|
28*9-15-12PR |
Rear |
|
6.5-10-10PR |
Wheelbase |
mm |
1700 |
Tread |
Front |
mm |
1000 |
Rear |
mm |
970 |
Min.ground clearance |
mm |
110 |
Engine |
Model |
|
XINCHANG490BPG |
Rated output |
kw/rpm |
37/2650 |
Rated torque |
N.m/rpm |
148/1800 |
No.of cylinder |
|
4 |
Displacement |
L |
2.54 |
Fuel tank capacity |
L |
52 |
One-year warranty explained:
CATERBE grants our clients a twelve-month-period or 2000-hours warranty for any machine exportedfrom us. During the warranty period, in case the defect of material or workmanship has occurred with spare partsin normal operation, the defective part will be repaired or replaced free of charge, at our discretion.
There are two ways we can ship the compensated spare parts:
(1) Upon the urgent request from our clients, we will ship the compensated spare parts by international courier,such as DHL, TNT, UPS or Fedex. The courier will arrive the designated destination within 5-7 days. The client willassume the courier expense.
(2) For the regular claim for the spare parts, we will ship the compensated spare parts together with next shipmentof new machines. The shipment expense is free.
We reserve the right to reasonably determine whether a defect in material or workmanship occurred in normal useor if such defect resulted from a factor excluded from this warranty. This warranty does not include defects fromnormal wear and tear, accidents, negligence, abuse, shipment, handling, storage, or environmental conditions.Any modifications to our products by the client, client's employees, or end-user, shall invalidate this warranty. Thenormal wearing and easily broken parts, include but not limit, all kinds of filters, belts, electric appliance and wires,bulbs and fuses, glass, rubber and plastics stuffs etc.








